Best Products for you! You can find here the best products list!
TEKTON Long Alignment Punch...
- A gradually tapered self-centering nose aligns holes in multiple parts, positioning them for accurate assembly
- Made from premium high-carbon steel
- Straight and true, the tip and taper are precisely machined to meet exacting tolerances
- Individual heat treatment allows careful control of tip hardness and temper of striking end
- Classic natural finish has a dry-touch rust-preventative coating
Mayhew Pro 61811 Alignment...
- Includes 22003 1/4" black oxide line-up punch, 22010 1/8" black oxide line-up punch
- 22011 5/32" black oxide line-up punch, 22012 3/16" black oxide line-up punch
- 22013 5/16" black oxide line-up punch, 22025 7/32" black oxide line-up punch
Closeout, Discontinued...
- Hardende high carbon hex stock steel
- Precision ground and polished tapered tips
- Black oxide finish resists corrosion
- Extra-long sizes can reach tight spots
- 3/16" x 8", 1/4" x 12", 5/16" x 15"
21%
RAM-PRO 16-Piece Punch and...
- ✓ The Ram-Pro Ultimate All-in-one Heavy Duty Punch and Chisel Kit are the Needed Tool Set for any metal or wood worker to Start, Punch, Align, and Mark holes, and get any job done quick and easy. Kit includes various sized punches and chisels for Repairing or Building any type of Project.
- ✓ SPECS: 16 PC Kit Includes: 5 Pin Punches – 5 Taper Punches – 3 Cold Punches - 2 Center Punches – 1 Chisel-Punch Gauge | Sizes are carved onto each Punch/Chisel for easy identification - Please refer to Description below for detailed Product Dimensions.
- ✓ QUALITY: Made from Heat Treated Chrome Vanadium {CR-V} Steel, Hardness: 54-58 HRC - Heavy Duty Non-Rust Sturdy Punches & Chisels will last through the most extreme impacts without deformation, and will fix mechanic jobs consistently without splitting or bending.
- ✓ DESIGN: All Tools have Hex Shafts and is Chamfered on striking end for Durability | ‘Pin Punches’ have long narrow ends for pin removals – ‘Taper Punches’ narrows down all the way for hole alignments – ‘Cold Chisels’ have sharp 60 Degree ends for splitting & Blacksmithing Metal – ‘Center Punches’ have precise tips for marking metal sheets – ‘Punch/Chisel Gauge’ has a 60 degree angle with Min and Max marks.
- ✓ USE FOR: The Must-Have Kit for Metal Working Mechanics | ‘Pin Punch’ is used to remove pins from holes – ‘Taper Punches’ is used to punch & align holes – ‘Cold Chisels’ is used for splitting rusted nuts and Blacksmithing Metal – ‘Center Punches’ makes dimples in cold metals to prevent drill ‘wandering’ - ‘Punch/Chisel Gauge’ used to measure and check the tools ends.
ABN Ladyfoot Rolling Head...
- MAKE ENGINE AND MACHINE WORK EASIER: When you need extra leverage to move heavy machinery in tight places, the ABN 4-Piece Rolling Pry Bar Set will always come in handy
- DUAL/DUO ENDS: Use the lady slipper pry bar end for extra leverage when lifting and prying; The tapered (pointed) end can be used as an alignment pry bar to align metal sheets and parts
- PERFECT SIZE FOR YOUR NEEDS: Lady foot pry bar set includes 4 wedged pry bars in 6, 12, 16, and 20 inches (15.3, 30.5, 40.7, and 50.8cm); Ideal for a wide range of work from small to large projects
- VARIETY OF DUTIES: Use this rolling wedge pry bar to line up subframes with the dowel end, to align bolt holes on two separate items, to pull seals and push stubborn bushings into place, and to move heavy equipment
- BUILT TO LAST: Drop-forged, heat-treated steel provides these rolling head prybar sets with maximum strength and resistance to bending, breaking, and corrosion
Drixet Heavy Duty Adjustable...
- The Drixet 12” Industrial Adjustable Spud Wrench is an all-in-one tool allowing the wrench to adjust itself to Tighten/Loosen most bolts/nuts while also working as a Marlinspike/Punch to easily complete your projects easily without any effort.
- SPECS: SPECS: Length: 12”- Adjustable Opening: 0 to 1.25” – End Diameter: 3/16” - Weighs: Only 1.3 lbs.
- QUALITY: Heat Treated Chrome Vanadium Steel with Phosphate Finish for massive strength and best leverage, Industrial Black finish resists corrosion – Materials are easily wipe clean of oil and dirt.
- DESIGN: The Spike Handle is a straight continuous taper all the way up until it transitions into an adjustable wrench for bolt alignment - Perfectly perpendicular and smooth Jaws - Knurled Wheel turns smoothly for easy operation.
- USES: Used to Assemble/Disassemble Flush Valves, and to Line up Bolt and/or Rivet Holes, and for Crosby Clips, and any Plumbing work etc.
TEKTON 5/16 Inch Alignment...
- Gradually tapered self-centering nose aligns holes in multiple parts positioning them for accurate assembly
- Made from premium high carbon steel
- Straight and true tip and taper are precisely machined to meet exacting tolerances
- Individual heat treatment allows careful control of tip hardness and temper of striking end
- Classic natural finish has a dry-touch rust-preventative coating
26%
Klein Tools 3255 Bull Pin,...
- Forged, heat-treated bull pin increases efficiency by providing a larger striking surface
- Head design also reduces chance of pin slipping from the hand when aligning holes
- Angled head and smooth blending of radii increase strength and reduce the danger of chipping
- Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins
- Long, even taper reduces binding and hang-up
10%
Astro Pneumatic Tool 1600...
- Taper Punch: 3/32-inchby5-1/4-inch, 1/8-inchby5-3/4-inch, 5/32-inchby6-inch, 3/16-inchby6-1/4-inch, 1/4-inchby6-3/4-inch
- Cold Chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-inch, 5/8-inch by 6-1/2-inch
- Pin Punch: 3/32-inch by 4-1/4-inch, 1/8-inch by 4-3/4-inch, 5/32-inch by 5-inch, 3/16-inch by 5-1/4-inch, 1/4-inch by 5-3/4-inch
- Center Punch: 1/8-inch by 5-inch, 3/16-inch by 6-inch
- Product material: CR-V and hardness: 54~58HRC