Best CO2 Regulators

Designed with an easy to adjust decompression pressure gauge to provide stable and accurate CO2 output
The CO2 Regulator can be used with disposable cartridges
Has a patented solenoid magnetic valve
Highly effective and energy efficient
Operates quietly and does not produce heat and designed for long term use

Two tri-layered reinforced neoprene diaphragms. (1st stage at 1-5/8 inches, 2nd stage at 2 inches)
CGA320 Inlet, Maximum Inlet:3000 PSIG
Large Brass T-handle for Smooth, Accurate Adjustments
Externally serviceable reseating pressure relief device (PRD). PRD not designed to protect downstream equipment
Delivery pressure: 5-125 PSIG

Dual gauge design allows you to monitor both the output pressure to the keg and the volume of CO2 gas remaining in the cylinder
Stylish black pressure gauges feature high-contrast red and white writing and sturdy rubber boots that help protect them from damage
Large ergonomic handle makes it easy to make precise pressure adjustments between 0-60 PsI for greater dispensing control
Durable chrome-plated brass body features a manual pressure release valve and an internal pressure relief valve that releases pressure at 55-65 PSI
A built-in tank washer prevents leaks while a sintered metal filter built into the stem keeps harmful contaminants out of the regulator

✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator!
✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder. For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc.
✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering.
✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank.
✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings. Order Now!

Low pressure gauge (the top gauge) indicates output pressure to the keg
The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi
High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
Duck bill check valve helps prevent product back up into the regulator
Assembled and Tested in the USA

✔ TOOLS INCLUDED! You Can Now Assist Your Aquatic Plants in Their Growth Cycle with Our CO2 Aquarium Regulator.
✔ Always Inject Just the Right Amount at The Right Time to Keep Your Plants Growing the Right Way.
✔ The Precision Construction of This Regulator Will Ensure That You Can Always Fine Tune the Amount of CO2, Adjust It as Necessary, To Create the Best Growing Conditions for Your Aquarium Plants.
✔ Our Regulator Was Created with High Quality Blue Stainless Steel, And It Was Designed to Last. Strong and Durable Steel Is Specifically Designed to Deliver Precision Measured Amounts of CO2 In Pressures from LP 150 PSI to HP 2000 PSI
✔ The Mini Dual Display Allows for Easy Reading of Your Settings to Ensure That They Are Always Where You Want Them to Be.

Large easy adjusting knob to increase or decrease delivery pressure
Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
Outlet features shut-off with back flow check valve and 5/16" I.D. hose barb nipple
Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
Blow-off is factory set at 55-65 psig

AGPTEK, as a professional Flow Meter Regulator Manufacturer, our Argon Flow Meter fits Argon, Co2 and Argon/Co2 fixed, Suitable for most argon tanks,argon hose for miller or Lincoln welders.
The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flow-meter will handle MIG and TIG welding both steel and aluminum.
Economy style flow meter regulator. Single stage piston design.
Combination of regulator and flow meter as one unit.
Outlet of the Flowmeter will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It comes with a standard 1/4" barbed fitting.

Best Products for you! You can find here the best products list!