Best Car Subwoofers

20%

Get legendary bass in your ride with this Kicker Dual 12 Inch Loaded Subwoofer Enclosure
Factory tuned, high performance CompR subwoofers and enclosures
Installs in minutes
Ported enclosure
Dual 12 inch subwoofers

The P3-2X12 is a dual P3 12” DVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level)
The P3-2X12 vented loaded enclosure is Internally wired to create a 1-Ohm amplifier load with power handling of 1200 Watts RMS / 2400 Watts Max
Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding posts for maximum signal flow to the speakers inside
The P3-2X12 loaded enclosure measures at 15.125" x 33.875" x 15.75" (HxWxD)
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

1000-watt(1000W) RMS/2000-watt(2000W) Max. 7.6 " mounting depth Dual 4 ohm 3" voice coils
DIE CAST ALUMINUM BASKET CARBON-KEVLAR ENFORCED NONPRESS PAPER CONE NT MULITLAYER HIGH DENSITY FOAM SURROUND TRIPLE STACKED 220 oz. MAGNETS
Multi pieces of new comex spiders cooling pump motor design uni-rubber gasket and rubber magnet boot

6-1/2" Woofer With Treated Foam Surround power Output 100 Watts Max85 Hz Low-Pass Filter (18 Db/Octave)
Line- And Speaker-Level Inputs frequency Response 39-85 Hz subsonic Filter (12 Db/Octave At 35 Hz) For Improved Amp Efficiency
Sensitivity 103 Db18-3/8"L X 6-7/8"W X 8-3/16"H2-Ohm Impedance
6-inch bass tube with on-board 100-watt, 2-channel amplifier
6-inch dual voice coil subwoofer

6-1/2" Woofer With Treated Foam Surround power Output 100 Watts Max85 Hz Low-Pass Filter (18 Db/Octave)
Line- And Speaker-Level Inputs frequency Response 39-85 Hz subsonic Filter (12 Db/Octave At 35 Hz) For Improved Amp Efficiency
Sensitivity 103 Db18-3/8"L X 6-7/8"W X 8-3/16"H2-Ohm Impedance
6-inch bass tube with on-board 100-watt, 2-channel amplifier
6-inch dual voice coil subwoofer

Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low level inputs: line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it

INCREASED OUTPUT CAPABILITY – specialized tuned port with computer aided design and 2.5” Voice Coils vastly increases output efficiency for your subwoofers providing you with consistent low sounding bass
DIGITALLY OPTIMIZED SUBWOOFERS – are carefully crafted for efficient and accurate bass, providing power handling up to 1100 Watts of Peak Power, 600 Watts RMS at a 4 Ohm impedance and Frequency Range between 30Hz – 200kHz for unrivaled sound superiority
CURVED PLEXIGLASS VIEWING WINDOW – illumiNITE design with Brushed Aluminum subwoofer cones create a surreal viewing experience
SOUND MDF CONSTRUCTION – and top grade in-line carpet eliminates the vast majority of enclosure movement for streamlined sound quality via both 12 inch subwoofers for unmatched sound superiority on the road
1 YEAR WARRANTY – guaranteed high quality and reliability with hassle-free parts and labor warranty with excellent customer service

Music Power (Nominal): 1,200 W (400 W) Frequency Response: 20 Hz to 125 Hz, Sensitivity (1 W/1 m): 93 dB, Impedance: Single 4Ω Tight bass from a shallow compact design, Reinforced MICA injection-molded resin preloaded subwoofer cone

5/8" MDF Construction
Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
Embroidered Terminator Logo; Impedance: 2Ω
Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure

The Punch P300-12 is a self-contained all-in-one solution featuring a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier
The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x D1 x D2): 15” x 19.8” x 11” x 7”
Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control included
Closed-loop design ensures optimum performance between woofer, amplifier and enclosure with easy integration in aftermarket or OEM audio systems using RCA or speaker level signals
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Best Products for you! You can find here the best products list!