Home » Reviews » Best Car Amplifiers

Best Car Amplifiers

Alpine PDXM12 1200W Mono RMS...
  • RMS: 1200W x 1 @ 4 ohms, 1200W x 1 @ 2 ohms
  • Total RMS Power: 1200W
  • CEA-2006 Compliant
  • 6-Layer Glass Epoxy PC Board and Compact Size
  • Thermal Protection Circuitry
Alpine X-A70F X-Series 4/3/2...
  • RMS Power Handling @ 4 Ohms: 120 Watts RMS Power Handling @ 2 Ohms: 175 Watts
  • Alpine ID Sound Quality, solving what’s missing in most car audio systems these days: great spatial imaging and depth of sound stage.
  • Class-D Performance
  • Built-in Crossover & Bass EQ
  • Remote Bass (RUX-KNOB.2) Compatible
Rockford Fosgate R500X1D Prime...
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
Pioneer TS-SWX3002 12"...
  • Tight bass from a shallow compact design
  • Reinforced mica Injection-molded resin preloaded subwoofer Cone structure
  • Carpeted, non-slip and scratch resistant enclosure surface
  • Enclosure size (WxDxH): 20-1/2" X 13-7/8" X 6-3/8"
Kenwood Excelon X301-4...
  • Like new Damaged Package
  • 50 Watts RMS x 4 @ 4 ohms
  • 75 Watts RMS x 4 @ 2 ohms
  • Total Peak Power: 600 Watts
  • CEA-2006 Compliant
Hifonics ZRX2416.1D Zeus Mono...
  • 2400 watt mono block D class amplifier
  • 1 x 800 @ 4 Ohms, 1 x 1600 @ 2 Ohms, 1 x 3200 watts @ 1 Ohm
  • Old school Hedonics heat sink for superior heat dissipation
  • Military grade PCB
  • PWM MOSFET power supply for maximum current levels
23%
Polk Audio PA D1000.1 Class D...
  • Super-efficient class D design—runs much cooler than conventional amps
  • High-speed MOSFET switching—Power supply with outputs stable into 1 ohm loads
  • Protection—Thermal, DC offset, reverse polarity and short circuit protection
  • Nickel-plated wire terminals & RCA connectors—Ensure maximum signal transfer
  • Level control—adjusts the gain of the channel to match the output voltage from your head unit
MTX Audio THUNDER1000.1...
  • Class D Topology
  • Variable LPF
  • Selectable Bass Boost
  • Small Foot Print Design
  • Surface Mount PCB
Rockford Fosgate PBR300X4...
  • Our ultra-compact (1.53” x 4.25” x 6.75”) Punch PBR300X4 is a full-range 4-channel amplifier designed for stereo front/rear systems that packs a Punch with 300 Watts of power without sucking a lot of juice from your electrical system
  • Designed to be compact and efficient while providing big power - RMS Power Output: 75 Watts x 4 @ 4-Ohm (4-Ohm only)
  • Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect for smaller stealth installations, motorcycles and recreational vehicles
  • Featuring high level inputs, MOSFET output stage, variable 4-6 volt hi level DC offset voltage input turn-on control, and 12dB/octave Butterworth crossover
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

 

%d bloggers like this: